Welcome to the Cnc Drilling Machine resource center. This site is designed to help you quickly and easily find the latest Cnc Drilling Machine reviews, Cnc Drilling Machine tutorials, and Cnc Drilling Machine videos and Cnc Drilling Machine for sale. The Cnc Drilling Machine information on this site is updated hourly, so if you are interested in Cnc Drilling Machines, bookmark this site so you can visit often.

Proxxon 34108 Micro Mill FF 230

A small, high accuracy machining system to mill, drill and bore. The micro milling machine FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360°, indicated on a scale. Height is adjusted via a zero adjustable hand wheel, also used as fine feed when milling. One revolution equals 1/32" (1 mm) travel, 1 division equals .002" (0,05 mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds. The machine comes with three collets of 15/64" - 5/16" and 25/64" (6, 8 and 10 mm). The solid table has a size of 10 5/8" x 3 5/32" (270 x 80 mm) and is T-slotted to 15/32" x 15/64" x 13/64" (the MICROMOT norm of 12 x 6 x 5 mm). 1. Hand wheel serves as both height adjustment and fine mill feed. 2. Poly-V drive system offers 6 speeds between 280 and 2,500 rpm. 3. The clamps and work piece shown are not included. 4. Hand wheels with zero adjustable scale, 1 rev = 1/32" (1 mm), 1 division = .002" (0,05 mm). Important: For best results when milling, it is recommended to lock the headstock. This is easily done by the FF 230's lock levers. Micro milling machine FF 230: A small, high accuracy machining system to mill, drill and bore.The micro milling machine FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360°, indicated on a scale. Height is adjusted via a zero adjustable hand wheel, also used as fine feed when milling. One revolution equals 1/32" (1 mm) travel, 1 division equals .002" (0,05 mm). The quill and headstock may be locked i